Slim Light, Roof Top, LED Light Display, Emergency Vehicle Lighting, Red And Blue Light Bar Police Lights, Ambulance, Emergency Lights

A1 SAFETY SUPPLY

423-895-6076

- BODY ARMOR -
POINT BLANK
- RADIO -

- VIDMIC -

Lapel Mic DVR

- KCI -

Radios & DVR Rec

- MOTOROLA -

Radio Units

VEHICLE ACCESSORIES

RONTAN

Vehicle LED Lighting

COPELAND

Battery Saver

STARCHASE

Pursuit Vehicle Tracking

KCI

In Car Camera,

Tracking & DVR

MSOA

Consoles

VMAT/VDRAIN

Easy Clean Floor Mat

SECURITY CAMERAS

- OPT DVR -

- OPTICS -
- LIGHTING -
TERRALUX
- HARD CASES -
- DUTY GEAR -
STRONG LEATHER
REFLECTIVE CLOTHING
- BARRICADE TAPE -
- DRUG TEST & ID -

ICM 40 Interface Control Module

An industry-first, the new Rontan ICM 40® Interface Control Module allows Rontan S-Series® lighting products to be controlled by any competitor’s controller. The ICM 40 serves as a translator, capturing commands from another installed controller into Rontan’s serial protocol to activate and control Rontan lighting products. Use an installed controller or select a high-quality, full-functioned Rontan S-Series controller.

• Control interface for all vehicle warning equipment
• Works with any brand controller
• Allows flash pattern to be uploaded/downloaded easily
• Allows flash pattern cloning through multiple units
• Makes installations easier and more efficient

ADD TO CART

ICM 30 Interface Control Module

Front interior VizorLight-S® assemblies are available with an ICM 30 module
that acilitates simple wiring to your current controllers.
• Works with any brand controller
• Allows flash pattern to be uploaded/downloaded easily
• Allows flash pattern cloning through multiple units
• Makes installations easier and more efficient

ADD TO CART

ICM 10 Interface Control Module

Rear Interior DeckLight-S® assemblies are available with an ICM 10 module, enabling directional stick and other flash patterns.
• Works with any brand controller
• Allows flash pattern to be uploaded/downloaded easily
• Allows flash pattern cloning through multiple units
• Makes installations easier and more efficient

ADD TO CART
The PA2100/2200

The PA2100 & 2200 are

Siren & PA amplifiers that are easy to install & easy to use.

  • 55W, 100W or 200W siren / amplifier
  • PA, Wail, Yelp, Manual and air horn
  • Radio rebroadcast
  • Compact design
  • Quick-connect microphone
  • Meets SAE standards
ADD TO CART
The DSC 40

Easy to use directional light pattern controller with soft-touch backlit buttons.

  • Serial Directional Stick Controller
  • Soft-touch, positive feedback switches are backlit with night dimming function. Switch backlight color changes to red in ON position
  • Six LED indicators confirming pattern selection
  • Meets SAE standards
     

ADD TO CART

LC2000 Digital Light Controller

The LC 2000 controls and activates the emergency vehicle lighting program for the Rontan lightbars and light assemblies through dedicated switches.

Through a progressive, three-position slide switch, the LC2000 can coordinate the activation of a vehicle's entire emergency lighting system.

  • Digital light controller
  • Tri-block architecture offers three internal, independent electrical circuits to maximize operational readiness
  • Nine built-in relays (5 at 15A; 3 at 20A; and 1 at 25A) driving 12V outputs
  • Three-position slide switch plus five functional switches, including a momentary contact switch
  • Soft-touch, positive feedback switches are backlit with night dimming function. Switch backlight color changes to red in ON position
  • Analog outputs provide direct and selective control of any 12VDC device.
  • Dual-function unit: as serial controller for Rontan serial light assemblies, and simultaneously as an analog for controller for other 12VDC devices.
  • Simplifies installation of any Rontan lightbar assembly by connecting only two serial wires.
     

The Winglux-S®
With its innovative swept-back design and all-new S-Series digital technology, Rontan’s Winglux-S lightbar stands out from the crowd in styling, performance, reliability and ease of installation.

  • Advanced two-wire serial connectivity with
    the ICM 40 module
  • Swept-back design for 360° visibility
  • Exceptional off-axis warning coverage
  • Modular LED light heads
  • Aerodynamic shape for less air noise
  • Rugged, triple-sealed dome for long life
  • Low-profile, stealthier appearance
  • Full array of standard control features
  • Fewer hours required for installation

Selectable Light Patterns and Modes
Clone, Upload or Download flash patterns with ICM 40 controller.

  • Virtually any flash pattern
  • Cruise light mode
  • Dimmer control mode
  • Intersection flash-pattern
  • Directional stick patterns
  • Front and rear cut-offs
  • Flashing take-down and alley lights

The Winglux-S®

Next Generation Lightbar
The S-Series, engineered with serial connectivity, represents the next generation of Rontan North America lightbars for law enforcement, emergency response and service vehicles. This top-quality, LED light assembly incorporates 100% digital technology for improved efficiency, easier operation and faster installation.

The Winglux-S lightbar has been refined to meet users’ evolving needs. New standard features include brighter LEDs with a dimmer function, cruise light mode, intersection flash-pattern capability, front and rear cutoffs and a stealthier appearance. Also standard are directional stick functionality, flashing take-downs and alley lights.

Superior Visibility
Due to the swept-back design of the Winglux-S, at least three light heads are visible at all times, even from the sides of the vehicle, for exceptional off-axis lighting coverage. Plug-and-play operability and modular design of the light heads facilitate easy installation, color changes and field expandability.

Advanced Technology
The Winglux-S is engineered for easy programming, fast installation and low amperage draw. Programming is through firmware, not hardware, requiring only two wires to control the lights, reducing the bulky wiring harness. Flash patterns and colors can be selected to meet all requirements. Rontan products are SAE compliant and meet California Title 13 standards.

Long service life and durability are designed in. The Winglux-S features a rugged, one-piece polycarbonate dome, which resists UV damage, and triple rubber sealing surfaces for superb weather-tight integrity.

ADD TO CART

The Vizorlight-S®

Next Generation Interior Front Visor Lighting
The new Vizorlight-S with compact LEDs incorporates Rontan’s S-Series serial connectivity and 100% digital technology. It represents the next generation of Rontan North America lighting technology for law enforcement, emergency response and service vehicles. For unmarked and semi-marked vehicles, the Vizorlight-S is inconspicuous and stealthy. For patrol cars and other marked vehicles, it is used for added visibility.

This top-quality light assembly is engineered for easy operation and fast installation. Programming is through firmware, not hardware, requiring only two wires to control the lights instead of a bulky wiring harness. Dimmer and cruise mode are available with use of an ICM 40 module.

Quiet Cool Rigid Aluminum Chassis
Built on an aluminum chassis, which acts as a heat sink, the Vizorlight-S provides notably cool operation – no need for a noisy cooling fan or forced ventilation. Unlike a plastic assembly, which can cause annoying flutter over rough roads, the chassis is rigid, yet lightweight. A built-in, threaded camera mount standard on all models.

Full-length rubber gaskets on the front and top edges permit tight mounting to the vehicle, minimizing any chance of rattle and blocking light from entering the interior.

Single- and two-piece Vizorlight-S models, depending on vehicle, are designed to quickly mount to the sun visor fastening points.

The Vizorlight-S is available for

  • Crown Victoria
  • Impala
  • Charger
  • Magnum
  • Tahoe
  • Suburban
  • Explorer
  • Durango

ADD TO CART

 

The Decklight-S®

Highly Efficient Design
High-visibility LED modules are mounted to a rigid, aluminum chassis for durability and cool operation, requiring no forced ventilation. Tailored for individual vehicles, the edges of the chassis closely follow the window contour for a tight fit. The Decklight-S is available for all standard law enforement vehicles. Custom fitting is also available for other vehicles.

Full-length rubber gaskets line the edges, eliminating the chance of rattling and preventing light from entering the vehicle’s interior. Mounting brackets are positioned to attach to the existing seatbelt fastening hardware for fast, easy installation. Threaded mounts are provided at both corners for mounting radar or camera equipment.

All-New S-Series Technology
Like the Vizorlight-S®, the Decklight-S® incorporates Rontan’s all-new S-Series serial connectivity and 100% digital technology. It represents the next generation of Rontan North America lighting technology for law enforcement, emergency response and service vehicles, offering improved efficiency and easy operation.

Rontan’s two-wire technology for controlling the light assembly eliminates a bulky wiring harness. Flash-pattern programming is through firmware, not hardware, for added functionality and trouble-free performance. Directional stick functionality is also standard and can be operated through your existing controller when used with a Rontan ICM 10 control module.

ADD TO CART

The Slimlight-S®

Multi-Purpose LED Lighting

The Slimlight-S® packs plenty of punch. Lighting modules containing five versatile LED light heads each are grouped into a durable, one-piece, aluminum housing, which can be mounted anywhere. A translucent cover seals the front of the housing, preventing road grime from reaching the LED modules. Slimlight-S light assemblies range from a new single module unit, at five inches long, to an eight module unit, at 33-inches long. Also available are a 9-inch (two modules), 17-inch (four-modules) and 25-inch (six-modules) versions. The six- and eight-module units can operate as directional sticks as well as warning lights.

S-Series Digital Technology
The Slimlight-S is engineered with Rontan’s all-new S-Series serial connectivity and 100% digital technology for easy programming, fast installation and low amperage draw. Only two wires are required to program and control the lights. Flash patterns and colors can be selected to meet all requirements. Units can be operated independently or synchronized with other Rontan light assemblies.


Available in five lengths, the highly versatile, multipurpose Slimlight-S® light assembly can be mounted wherever warning light coverage is needed – inside or outside the vehicle.

  • LED Lightheads
  • 100% digital technology
  • Low amerage draw
  • Five lengths: 5”, 9”, 17”, 25”, and 33”
  • One-piece aluminum housing
  • Translucent protective front
  • Multiple light color options
  • Flashing or Directional Stick pattern

 

• All Rontan North America products are assembled and serviced in the U.S.
Winglux-S®, Vizorlight-S®, Decklight-S®, Slimlight-S®, Flexlight-S®, Digilight® are registered marks of Rontan North America, Inc. •

© 2008 Rontan North America